1. Welcome to Hvacproforums, an interactive community exclusively for HVAC professionals. The collective years of HVAC experience and the knowledge our forum members share make this an invaluable resource for those in the HVAC industry. We have a lot of fun, but make no mistake, we are pros. Hvacproforums is self supporting ...there are NO advertisers here. Do-it-yourselfers and Homeowners are encouraged to seek information elsewhere. Those involved in the HVAC industry are urged to register. its 100% free and easy, Once registered you will have access to the technical forums, Be sure to click over to the new members forum and introduce yourself after registering!

40 Ton Rtu

Discussion in 'Commercial' started by Texas-Tech, Nov 16, 2017.

  1. Texas-Tech

    Texas-Tech Official Geezer*

    Messages:
    17,729
    Location:
    duhh
    6 month old install, nice from the roof but pretty shitty down below. Problem was sucking water out of the pan. Nice copper drains but they are not draining very well. Dropped them down and did what we could to facilitate flow. Took a static pressure reading for shits and grins, 2.40 tesp , supply air was .23. Now I'm scratching my head trying to get a grip on those numbers when you have 18,000 cfm.

    Lo and behold
    [​IMG],
    Notice the heat strips and the insulation coming off, now who in their tight mind cuts a hole right under the supply drop?
    [​IMG]
    ****in eh
    [​IMG]

    all I can say is damn
     
    Rather B Riding, coldsnap and Jon like this.
  2. HMD

    HMD does it matter?

    Messages:
    93,375
    Location:
    here
    sumbitch!
    the scrappers stole the grills!
     
  3. Texas-Tech

    Texas-Tech Official Geezer*

    Messages:
    17,729
    Location:
    duhh
    Naw, you don't need any
     
  4. Catpower

    Catpower The Crowd Pleaser

    Messages:
    22,333
    Location:
    in the Cabana
    Looks like the duct work in my wood shop, strategically placed air dumps over places that I work or sit and think about working, gotta get the cool air on da boss:lachen::lachen::lachen::lachen:
     
    Texas-Tech likes this.
  5. dylanmitchell

    dylanmitchell New Member

    Messages:
    24
    Definitely looks too small probably just replace it with a 80 ton...
     
  6. knave

    knave Undeterred

    Messages:
    8,193
    Location:
    Out for a rip
    And the cold air blows down on the one spot where the cell phone won’t work, right?? Lol
     
    Catpower likes this.
  7. Catpower

    Catpower The Crowd Pleaser

    Messages:
    22,333
    Location:
    in the Cabana

    Yup, but that wasn't the reason I did it it just is what it is

    I could set at the other end of the bench, but my Omnijig is bolted to the bench
     
  8. Rather B Riding

    Rather B Riding Behind bars

    Messages:
    608
    20 ton trane. IMG_20160209_091619553.jpg