1. Welcome to Hvacproforums, an interactive community exclusively for HVAC professionals. The collective years of HVAC experience and the knowledge our forum members share make this an invaluable resource for those in the HVAC industry. We have a lot of fun, but make no mistake, we are pros. Hvacproforums is self supporting ...there are NO advertisers here. Do-it-yourselfers and Homeowners are encouraged to seek information elsewhere. Those involved in the HVAC industry are urged to register. its 100% free and easy, Once registered you will have access to the technical forums, Be sure to click over to the new members forum and introduce yourself after registering!

HVAC Helper

Discussion in 'New members' started by Texasstyle44 AAON, Dec 26, 2017.

  1. Texasstyle44 AAON

    Texasstyle44 AAON New Member

    Messages:
    7
    What's up everyone. Been doing HVAC, electric, gensets, commissioning, control's etc for 22 plus years. HVAC helper is what I am most days! Fools say I don't wash coils or carry my own tools. "Hahaha fool's you can't work for me!" So please don't contact me. I wish I knew, I could make cash money washing coils when I was a kid! I would have dropped out in 5 grade. Easy money in Texas..

    Sent from my SM-G955U using Tapatalk
     
    jessefarmer93 likes this.
  2. jessefarmer93

    jessefarmer93 New Member

    Messages:
    5
    You hiring? Hahaha

    Sent from my SM-G930V using Tapatalk
     
    Texasstyle44 AAON likes this.
  3. Texasstyle44 AAON

    Texasstyle44 AAON New Member

    Messages:
    7
    Only if you are not sacred to do anything! But yes we are always hiring.

    Sent from my SM-G955U using Tapatalk
     
  4. jessefarmer93

    jessefarmer93 New Member

    Messages:
    5
    What's your experience requirement?

    Sent from my SM-G930V using Tapatalk
     
  5. Texasstyle44 AAON

    Texasstyle44 AAON New Member

    Messages:
    7
    We're do you live? We hire from shop helper to apprentice and all level services techs. We have cooling tower group, water treatment group, HVAC rentals from chillers to kw heaters etc. Service is always looking for good hands if you are in Texas. Outside of Texas I can put the word out with are partner company. I just need to know your background and career growth.

    Sent from my SM-G955U using Tapatalk
     
  6. jessefarmer93

    jessefarmer93 New Member

    Messages:
    5
    Great with heat pumps and good with refrigerant cycle. I live in north Florida and see mainly heat pumps. Not great with gas but can certainly change a blower in a pancake unit. Low voltage is not a problem for me. Ran high voltage for 2 years.

    Sent from my SM-G930V using Tapatalk
     
  7. Texasstyle44 AAON

    Texasstyle44 AAON New Member

    Messages:
    7
    Well, Florida is are partner group Hobbs and Associates. We have a office opening up in Orlando, FL. Then we have two more coming soon. Not sure if that's to far for you right now.

    Sent from my SM-G955U using Tapatalk
     
  8. Catpower

    Catpower The Crowd Pleaser

    Messages:
    22,470
    Location:
    in the Cabana
    Howdy

    What part of Texas do you hail from?

    Sounds like you work for Entech
     
  9. Catpower

    Catpower The Crowd Pleaser

    Messages:
    22,470
    Location:
    in the Cabana
    But you didn't say anything about genset rentals
     
  10. chucko615

    chucko615 Banned camp counselor

    Messages:
    14,524
    Location:
    Michigan
    Welcome....................I know people who know people that know genset
     
    Texasstyle44 AAON likes this.
  11. Texas-Tech

    Texas-Tech Official Geezer*

    Messages:
    17,958
    Location:
    duhh
    Welcome
     
    Texasstyle44 AAON likes this.
  12. Texasstyle44 AAON

    Texasstyle44 AAON New Member

    Messages:
    7
    Texas Air Systems. I'm in the Irving office.

    Sent from my SM-G955U using Tapatalk
     
    Catpower likes this.
  13. flange

    flange Act like you care and do SOMETHING!!

    Messages:
    12,970
    Location:
    IMT--in my truck
    I have thirty years experience on large tonnage chillers, high horsepower boilers, controls and unitary stuff when necessary. I am well versed in pipefitting up to 48 inch diameter, and can weld when necessary, although my xray certs have expired from lack of use. I can also do design work and run a business. need relocation expenses and annual salary mid six figures to start, plus four weeks vacation.
     
    GTT likes this.
  14. pecmsg

    pecmsg Junior my ASS

    Messages:
    21,738
    Location:
    Eastern LI
    Do they still mount the freeze stats in the control box so when it gets cold they trip even though the coils are good?
     
  15. HMD

    HMD does it matter?

    Messages:
    93,981
    Location:
    here
    i detect a mass banting
     
  16. MNHVAC

    MNHVAC Man on a mission

    Messages:
    165
    Location:
    MN
    Welcome
     
  17. Zman

    Zman Hanging by a Thread

    Messages:
    1,256
    Location:
    The "I know a Guy" State
    and a Service Van!
     
  18. Zman

    Zman Hanging by a Thread

    Messages:
    1,256
    Location:
    The "I know a Guy" State
    ...with AM/FM.
     
  19. coldsnap

    coldsnap -20 on the money

    Messages:
    4,507
    Location:
    Wisconsin
    Welcome aboard
     
  20. HMD

    HMD does it matter?

    Messages:
    93,981
    Location:
    here
    and air kuditioned!