1. Welcome to Hvacproforums, an interactive community exclusively for HVAC professionals. The collective years of HVAC experience and the knowledge our forum members share make this an invaluable resource for those in the HVAC industry. We have a lot of fun, but make no mistake, we are pros. Hvacproforums is self supporting ...there are NO advertisers here. Do-it-yourselfers and Homeowners are encouraged to seek information elsewhere. Those involved in the HVAC industry are urged to register. its 100% free and easy, Once registered you will have access to the technical forums, Be sure to click over to the new members forum and introduce yourself after registering!

"Wood" you say here's your problem

Discussion in 'Residential' started by R2D2-TX, Jun 19, 2017.

  1. R2D2-TX

    R2D2-TX New Member

    Messages:
    437
    IMG_6376.JPG
    Suction in a vacuum... head @400 plus
     
  2. Texas-Tech

    Texas-Tech Official Geezer*

    Messages:
    17,596
    Location:
    duhh
  3. crackertech

    crackertech assholiness *

    Messages:
    91,006
    Location:
    Fl/IN/Ga/Ms/TX/NJ/VA/NC/TN
  4. oroy54

    oroy54 New Member

    Messages:
    22,547
    Location:
    Victoria, Texas
    Looks like a cricket,
     
  5. R2D2-TX

    R2D2-TX New Member

    Messages:
    437
    Its wood fibers... go figure!
     
  6. jays 65

    jays 65 New Member

    Messages:
    337
    inject some termites in there problem solved lol
     
    coldsnap, Jim54 and R2D2-TX like this.
  7. jamesyarbrough

    jamesyarbrough Amateur Gynecologist

    Messages:
    3,707
    Location:
    Denison TX
    How did u go about clean up?

    Id be inclined to add a new drier and suction filter
     
  8. R2D2-TX

    R2D2-TX New Member

    Messages:
    437
    Removed the piston.. nitrogen purge both ways... sweat in liquid drier at the evaporator.. vacuum and charged..
    Then charged the customer a price to remember...
     
    Catpower, jpb2 and jamesyarbrough like this.
  9. crackertech

    crackertech assholiness *

    Messages:
    91,006
    Location:
    Fl/IN/Ga/Ms/TX/NJ/VA/NC/TN
    My wife likes morning wood,,,, just saying :D
     
    R2D2-TX likes this.
  10. R2D2-TX

    R2D2-TX New Member

    Messages:
    437
    You know the meaning of torque?

    The morning woody pushed down to take a wiz and your feet fly out behind you...
     
  11. crackertech

    crackertech assholiness *

    Messages:
    91,006
    Location:
    Fl/IN/Ga/Ms/TX/NJ/VA/NC/TN

    The angle of the dangle x the heat of the meat divided by torque of the pork =' s the sum of the cum
     
    doc havoc and R2D2-TX like this.
  12. Jim54

    Jim54 New Member

    Messages:
    258
    Location:
    Addison, Tx.
    Alternate formula:
    Angle of the dangle times the mass of the ass over the square of the hair is equal to the cube of the tube divided by the lube.
     
  13. frozensolid

    frozensolid Psychologist's Dream

    Messages:
    12,259
    Location:
    Earth
    That is the new organic refrigerant it grows a tree so you can have shade.
     
    knave likes this.
  14. LemonWizard

    LemonWizard Blinky Lights Wizard

    Messages:
    2,135
    Location:
    Ohighyo
    You got a better way to cut down carbon?